Enthermics DC250: 6-Blanket Warming Cabinet

Description

The Enthermics DC250 6-Blanket Warming Cabinet is an ideal solution for healthcare settings. Its countertop design fits seamlessly into labor and delivery rooms, ICUs, and NICUs. With no moving parts, the warmer operates quietly, allowing healthcare providers to focus on patient care without disruption. This design also ensures ease of use, enabling nurses and aides to position it where needed to maximize efficiency.

The DC250 incorporates features that enhance both comfort and convenience. Inside, relaxing blue lights create a soothing atmosphere for patients. Additionally, WarmSafe™ zone heating technology ensures rapid and efficient warming of blankets. This technology, paired with heated shelves, provides consistent and even warmth throughout the cabinet. Nurses can confidently rely on the unit to maintain the ideal temperature for patient comfort.

Thanks to fan-less technology, the DC250 eliminates noise, promoting restful recovery. This feature also reduces maintenance needs, as there are no fans to become clogged with lint. As a result, the DC250 not only improves patient comfort but also simplifies the workload for healthcare staff. It’s a smart, low-maintenance solution for hospitals aiming to provide the highest level of patient care.

See tabs for more information.

Have questions about Medical Warming Cabinets? Visit Medical Warming Cabinets in our Knowledge Center to learn all about them.

To view additional Blanket and Solution Warming Cabinets, click the following link to browse Venture Medical’s Complete Catalog of New and Completely Refurbished Blanket & Solution Warming Cabinets.

Additional information

Condition	New
Brand	Enthermics

LED interior lighting casts a comforting blue glow with two (2) different intensity settings and off-mode
In the event of a power failure, the cabinet will remember its programming and begin to operate as before when power is restored
A warming shut-off system, separate from the electronic control, prevents overheating
The access point and the plug have been added to the back panel to allow the appliance owner to add their data logger or temperature management hardware
Single-chamber warming cabinet White epoxy-coated steel exterior casing and interior insert
Glass Door: Single pane, energy-efficient, e-coated glass window in the door allows for inventory observation and reflects heat into the cavity
Convenient: The hands-free, push-button door is designed to make loading easier when carrying an armful of blankets
The door has a full gasket and is hinged on the right side of the unit
WarmRight® incorporates a multiple-zone warming technology that heats where and when it is needed
All chamber surface temperatures are monitored, providing an efficient balance of heat, low energy consumption, and minimal heat loss
Mix and Match: Pair with a Designer Series fluid warming cabinet to complete your patient warming system
Furnished with four (4) 3/4″ (19 mm) non-skid rubber feet
Mobile: Optional casters or mobile cart available, sold separately

General Specifications:

Chamber: Single-chamber warming cabinet
Lighting: LED
Dimensions: 21.9 in H x 18.5 in W x 24.8 in D
Interior Size: 2.5 ft
Capacity: 4-6 Blankets
Interior/Exterior: White epoxy-coated steel exterior casing and interior insert
Window: Single pane, energy-efficient, e-coated glass
Door Release: Push-button door release
Door: Full gasket and hinged on the right side of the unit
Warming Zones: Multiple zone warming technology
Temperature Monitoring: All chamber surface temperatures are monitored
Furnished with four (4) 3/4″ non-skid rubber feet

Transport and storage environmental Conditions (not to exceed 15 days):

Ambient temperature range of -40° to +70°C
Relative humidity range of 10% to 95%, non-condensation
Atmospheric pressure range of 50KPa to 106KPa

Operational environmental Conditions:

The unit must acclimate to room temperature in the environment it will be placed. 24 hours is recommended
Recommended environmental temperature range is 15°C to 32°C (60°F to 90°F)
The recommended relative humidity is above 20%, non-condensation

Control:

Adjustable temperature range of 37 – 82°C (98 – 180°F)
Operates in Celsius or Fahrenheit
Four-digit LED display
On/Off key
Up and down arrow keys
Actual temperature key
Interior light key
Built-in speaker for audible feedback
Built-in control button lock-out feature

Enthermics Designer Series Warming Cabinet Brochure (click to view)

Available Options are Sold Separately, and all options must be specified at the time of order.

3” Bumper & Caster Assembly – overall height increases by 5″:

White epoxy coated – 5017546
Stainless Steel – 5017548

3” Plate & Caster Assembly – (2 casters -rigid, two casters – swivel with brake), overall height increases by 5”:

White epoxy coated – 5017542
Stainless Steel – 5017544

3″ casters (4 caster – swivel; 2 casters – with brake); overall height increases by 4.3″:

5012693

Door Assembly, Blue epoxy coated without manual door lock is standard:

Blue epoxy coated with manual door lock (optional)
Stainless Steel without manual door lock (optional)
Stainless Steel with manual door lock (optional)

Seismic Mounting Brackets:

Special installation requirements apply; overall width increases 2″: 1014403

Stacking Kits: (It is recommended that fluid warming units be placed at or near the bottom of the stacked configuration whenever possible for maximum stability)

Double Stacked, White epoxy coated: 5013021
Double Stacked Stainless Steel: 5017272
Triple Stacked, White epoxy coated – 5017537
Triple Stacked, Stainless Steel – 5017539

Cart :

Dimensions – 34-1/2″ H x 24″ W x 26″ D: 5018614

Timer Control:

An optional timer allows the user to program the warmer to automatically turn on and off at a selected time (Available with original order only)

Enthermics 6-Blanket Warming Cabinet | DC250

Brand New

Description

Additional information

You May Also Like

Have Questions?