• Stainless Steel Construction
• Provide maximum storage on five polished glass or stainless steel shelves
• Adjustment of shelves every 1/4″
• The sloping top prevents dust collection
• Locking door latch secures contents
• Three-inch swivel casters, two with brakes.
• Storage compartment with a seamless welded face doubled front edges and a sloping top
• The cabinet is mounted on four offset-type legs on casters, welded into the bottom corners, with a counterweight fastened under the bottom rear for doors in the open position
• Two glass-paneled doors, of double-shell design, fit the rabbeted frame of the cabinet and hinge on three semi-concealed stainless steel hinges each
• The outer frame is one piece, die-formed, to receive a rubber gasket glass panel held in place by removable interior retaining strips
• The Right-hand door is fitted with a locking handle and three-point latching
• The left-hand door with a dummy knob and spring-loaded nylon roller catches
• The cabinet interior consists of either five glass shelves, adjustable in 1″ (1.27) increments on full-height
• Welding: Welding is accomplished by the heli-arc method. All exposed welds ground smooth
• Finish: Exposed surfaces are free from pit marks, weld seams, and scale, and polished to a satin finish
• Casters: 3″ (7.62) ball bearing swivel type

• Model Number: 7970SS
• Item Number: 1537970000
• Materials: Stainless steel, Type 300 Series, nickel-bearing, 1/4″ (0.64) clear tempered sheet glass
• Gauges: Body, outer doorframes, and sloping tops-18 gauge. Door inserts-20 gauge. Legs-12 gauge
• Construction: Cabinet consists of a storage compartment with a seamless welded face, doubled front edges, and a sloping top. The cabinet is mounted on four offset-type legs on casters, welded into the bottom corner, with counterweight fastened under the bottom rear for doors in the open position. Two glass-paneled doors, of double-shell design, fit the rabbeted frame of the cabinet and hinge on three semi-concealed stainless steel hinges each. The outer frame is one piece, die-formed, to receive a rubber glass panel with a gasket, held in place by removable interior retaining strips. The right-hand door is fitted with a locking handle and three-point latching, and the left-hand door with a dummy knob and spring-loaded nylon roller catches. Cabinet interior consists of either five glass shelves, adjustable in 1″ (1.27) increments on full-height, slotted-shelf stripping welded to the rear and side walls (Paul models only), or an 18-gauge, stainless steel, full height-and-width pegboard, fastened to three channels and welded to the inside back wall (Walter Models only).
• Welding: Welding is accomplished by heli-arc method. All exposed welds ground smooth
• Finish: Exposed surfaces are free from pit marks, weld seams, and scale, and polished to a satin finish
• Casters: 3″ (7.62) ball bearing swivel type

Available Options Sold Separately:

• Blickman (Paul) Instrument and Supply Cabinets with glass shelves: 7970SS
• Blickman (Paul) Instrument and Supply Cabinets with Stainless Steel Shelves: 7970SS-1
• Optional stainless steel doors and glides